Mercury recovery in situ of four different dental amalgam separators
Abolishing the use of dental amalgam and cleaning the tubing systems is the most efficient long-term solution to reduce Hg emissions from dental clinics. Until then, Hg emissions originating from placing, polishing or removing existing amalgam fillings, should be counteracted by the use of low-emission amalgam separators, already on the market or presently being developed for use alone or together with sedimentary type amalgam separators.
Evaluating amalgam separators using an international standard
This laboratory evaluation shows that amalgam separators and the filtration devices removed at least 97.05 percent of the amalgam in samples with particle-size distribution as specified in ISO Standard 11143.
An assessment of mercury in the form of amalgam in dental wastewater in the United States
The annual use of mercury in the form of amalgam in the U.S. is approximately 35.2 tons (31.9 metric tons). It was estimated that 29.7 tons (26.9 metric tons) of mercury in the form of amalgam are annually discharged to the internal wastewater systems of dental facilities during amalgam placements and removals. Based on the partial capture of this amalgam in conventional chair-side traps and vacuum filters, the discharge of mercury in the form of amalgam from dental facilities to POTWs was estimated to be 6.5 tons (5.9 metric tons). The discharge of mercury to surface water via POTW effluents and SSI emissions was estimated to total approximately 0.4 tons (0.4 metric tons).
DISPLAY POSTS FROM ANYWHERE